Things You\’ll Need
Crack the plaster before scraping it.
Plaster is a popular choice for covering walls, as it is easy to apply, durable and gives a smooth finish, making it very easy to paint or paper over. However, the hard-wearing nature of plaster means that once it is applied to a surface and allowed to cure, it can be incredibly difficult to remove. Removal of plaster from concrete block walls is, therefore, an exercise in scraping, dissolving and, above all, patience.
Video of the Day
Tap the plaster firmly using a hammer, to break the surface. This will cause the plaster to crack and begin to flake off. Scrape away as much of the cracked plaster as possible using a paint scraper or other wide, flat tool.
Put on safety gloves. Pour muriatic acid onto an old cloth until it is soaked. Press the cloth against the remnants of plaster on the wall. Cover the cloth in a layer of plastic, such as the plastic used for wrapping sandwiches. Tape the plastic firmly in place against the wall, to keep the moisture in and prevent the acid from evaporating.
Wait 24 hours. Peel back the plastic and cloth from the wall. Scrape away the dissolved or partly dissolved plaster using the paint scraper. If any sections of plaster will still not come away, moisten the area with more muriatic acid, dampen the cloth and re-affix it to the wall. Wait another 24 hours then scrape away the plaster again.
If large sections of the plaster will not dissolve in the acid, tap them firmly with the hammer, then try scraping them away again. Sometimes the plaster becomes weakened by the actions of the acid, and the hammer can then break it apart enough to scrape away.
Working with acids is a highly dangerous procedure. Always wear safety gloves and safety goggles when handling them, as splashes can lead to severe burns or even blindness. Store acids in a cool, dry place well away from children and animals.