Things You\’ll Need

  • Ruler

  • 2 wooden 1 inch by 2 inch about 3-4 inches longer than the width of your door or window

  • Beads

  • Fishing line

  • Hot glue gun

  • Scissors

  • Pen

  • 2 Eyelets or 2 nails to hang your curtain from (and a hammer if you use nails)

... A wooden beaded curtain Image Credit: Final beaded curtain

For most people, beaded curtains are nothing more than cheap-o plastic beads factory-strung in a boring and regular pattern to provide a door where there isn't one. It doesn't have to be that way. The quality of your curtain can be vastly improved by using beads that are far better than average plastic balls, or, better still, made of a natural material. Be spontaneous with your shapes and create varying patterns to make a curtain all your own.

Video of the Day

Step 1

... Supplies Image Credit: Supplies

Please see the last slide for an itemized material list.

Step 2

... Measure and mark Image Credit: Step 1

Make a 1/4 inch long mark on the mid-point of your wood at every inch. You may end up spacing your beads differently, but it's good to have marks there so when you have your strands tied to the marks and want to adjust, they can act as a spacing guide.

Step 3

... Start your first strand Image Credit: Step 2

Cut one strand of fishing wire a foot longer than what your first finished strand will be. String on one bead at one end. This will be the last bead of your first strand. Make multiple loops through the hole of the bead and tie a knot to secure it.

Step 4

... Make a strand Image Credit: Step 3

Take the other end of the wire and string on your beads, making the beaded strand as long or as short as you want.

Step 5

... Tie a knot Image Credit: Step 4

To tie the beads to the wood, loop the excess open end of the fishing wire around the wood four or five times. Make a knot between the wood and the first bead.

Step 6

... Run excess through and snip Image Credit: Step 5

Run your excess fishing wire back through 4 or 5 beads and snip to make it disappear.

Step 7

... Play with symmetry Image Credit: Step 6

Play with symmetry and figure out your pattern. I made 13 strands total, they measure 24 inches(2), 21 inches(2), 18 inches(2), 15 inches(2), 12 inches(2), 10 inches(2), 9.5 inches(1). If you plan on making a similar shape, making 2 strands at a time in the same length is more time efficient.

Step 8

... Finish the face Image Credit: Step 7

After moving your strands to the desired spacing, hot glue another piece of wood exactly on top of the panel. The final width for this project was 16 inches wide so the 13 strands were all a little over an inch apart.

Step 9

... Hang it up Image Credit: Step 8

Take two 8-inch pieces of fishing line and tie loops with them. Add one loop on each end of the wooden rod on either side of the curtain and hang from nails (or eyelets) in your window frame.


You will need a lot of beads for this project, but keep in mind, the bigger the beads and longer the strands, the heavier the curtain will be. Take apart jewelry you are not wearing for some fun nostalgic pops, find strands of beads at thrift stores, or look through your grandmother's jewelry chest.


Please enter your comment!
Please enter your name here